Other
“This project is a nice way of displaying the time and weather in a small convenient package. I will explain the project, how it works and show the code here. You can press different buttons to show the current weather …
“The project presented here is a versatile high voltage Half-Bridge with current feedback. The board is built using L6390 IC from ST Semiconductor. It is suitable for DC-DC converters, EHT drivers, induction heater drivers, battery chargers, LED drivers, DC …
“Make a DIY 224 LEDs strip face mask. We have made a LEDs face mask with voice control before, but due to too small to reflect our rich expressions, we redesigned a larger LEDs mask with 224 LEDs using LED …
“Who has time to wait for minutes per day to push a button? Let’s automate the motion of an electric IKEA desk with an Arduino Nano! I have an electric IKEA Bekant sit/stand desk. It’s designed so …
“Using the Garmin LIDARLite v3HP, Arduino MKR WIFI 1010 and Pushsafer to detect an intruder and send a push notification to a smartphone. Story I needed an outdoor intrusion sensor for my driveway with a longer range than PIR and …
“We will make a LoRa based GPS tracker and connect it to the TTN, this gives your GPS Tracker maximum range without internet. A couple of projects back we had a look at the LoRaWAN Gateway from Dragino. We connected …
“I made a mini 3D POV (Persistence of Vision) Display to enhance the Christmas spirit. Constitution The LEDs are arranged three-dimensionally and rotated to display an image with an afterimage. I used a compact ATOM Lite as a microcomputer. The …
“Modern times make modern solutions possible. Therefore, the step to a digital snow globe is not that far. What? Snow globes and lava lamps have one thing in common: they are impressively simple and beautiful to look at. And you …
“Everyone likes a good infinity cube, but they look like they would be hard to make. My goal for this Instructable is to show you step-by-step how to make one. Not only that, but with the instructions that I’m …
“Micro Gear Motor based small robot powered by a Wemos D32 Pro and controlled by Blynk app. So this is my microbot V1 which is an ESP32 based robot which is powered by a Wemos d32 pro and controlled by …