Other
“The cheapest micro soldering station in the world, using a cheap USB soldering iron. Hi guys. I wanted to create an affordable soldering station that’s easy for anyone to build for less than $10. More features to come, but …
“This 3 in 1 shield for Arduino Nano helps to develop various temperature measuring applications. Arduino Nano shield consists of 3 different types of temperature sensors. MLX90614 non-contact temperature sensor10K NTC Analogue Temperature SensorProgrammable Resolution 1-Wire Digital Thermometer With this …
“Battery capacity tester: with this device you can check the 18650 battery, acid and other (the biggest battery I tested It’s 6v Acid battery 4,2A), I need It to check fake china battery. For safety, I added, using …
“Do you really want a plastic pop-up timer telling you when your turkey is done? How about a tricked out IoT solution instead? Ever wonder what temperature your Thanksgiving turkey is really at when that plastic pop-up timer pops? When …
“Laser power tool.e-dohicky is the electronic version of the dohicky from Russ SADLER. The procedure begins as described by RUSS. It is necessary to begin by choosing an exposure time among 3 proposed by RUSS, 10.25, 20.5 …
“Instead of buying filament produced from plastic pellets. Why not use your own plastic waste and produce filament much cheaper and eco-friendly? It’s environmental project that will help sustain plastic problem. Plastic shreds are inserted through hopper. the heater …
“IoT (internet of things) environment monitor based on Esp8266 (NodeMCU), Arduino, Jquery, Django REST, Fritzing, the third industrial revolution, and the Hammond 1551k project box. Designed in Colorado by Object Syndicate. ioTank captures real time (every 300ms) sensor readings for …
“The main reason I made this project is the lack of a trip computer that is designed for LPG powered cars. I named it Bi-TripCo as it can measure the fuel consumption for both fuel systems of a Bi-Fuel car …
“It’s a low cost, full-featured 3D Printer, and the most important thing is, you don’t need any 3Dprinted parts to build the 3D Printer. If I have a 3D printer,I don’t have to look around how …
Project Simple DIY Dual Pulse Spot Welder with Arduino Controller and Screen (microwave transformer based)
“So you want to build your own spot welder? I did too! I found lots of good how-tos out there, but most of them require hard to find parts, custom PCBs, or some other such barriers to entry. So I …
“I wanted to start gardening, but I knew I wouldnt keep up the regular schedule of watering the plants and making sure they got enough light. So I recruited a microprocessor and a suite of sensors to help with these …
“An ultra lightweight microcontroller based sensor platform. Primarily built to function underwater but with the addition of a parachute, could be used to measure air temperature and other readings from a height.”