Other
“Obstacles Avoiding Smart Car Using Arduino In this tutorial we make simple project on Obstacle Avoiding Robot using Arduino. It is an Arduino based robot car that uses Ultrasonic Sensors to avoid obstacles. I hope to do step by step …
“One of the challenges is to get the robot to go in a straight line. With this information, we can instruct our robot to go straight. For this project, we will only need a two (or four-wheeled) robot with appropriate …
“This is PlottyBot, a pen plotter you can build. It’s based on a Raspberry Pi Zero W which means it’s loaded with software to make it easy to use. It also comes with novel features.”
“This is a rangoli/sand-art-making robot. It has 2 servo motors controlled by an Arduino Uno prototyping board. It can draw different shapes. What is your project about? This project is about a robot that can draw and write on …
“This project reuses a motor lane from a DVD or CDROM to be able to take macro photography with fairly high precision; 1.5cm approx 99 steps => 0.015cm x step or 15 microns. 5cm => 333 steps max Rings 49mm …
“Arduino machine that figure out keypad password. Supplies - 11 pcs 9g servo motor - Arduino mega mini - Arduino nano - Keypad - Oled display - Led - Photoresistor - Pcb - Pin headers - 6mm rod and m6 nuts - 3d printed parts”
“Making a simple quadruped which can move in a straight under static stability. Preface This robot was built from scratch and I had to reiterate on the core concepts a couple times. It was built under tight time constraints. The …
“Control your pinhole camera with ease with this ultimate shutter control that delivers also timer and reciprocity control. Story Ultimate pinhole camera shutter control Tired of waiting and watching seconds to run to get correct exposure with your pinhole camera …
“Hello everyone, I would like to start by asking a question: Wouldn’t it be great to have a robot at home that folds your t-shirts as they are folded when you buy them in a shop? If your answer …
“Built this primitive 2d pen plotter using two standard servos (plus one microservo for pen) and 3 drawer slides. Software is DrawingBotV3 to create gcode which is sent to Arduino Uno via Python script. Simple and draws crude prints but …