Other
“Hello Everyone, thank you for showing interest in our project. In this project, we are showing a fully automated robot that sorts fruits and vegetables based on their color. The project happened in the context of the Bruface program and …
“This is a fun beginner project for anyone to make! It is a four legged spider robot platform using Raspberry Pi as the brain, 3D printed parts as the body, and many readily available electronics from amazon or banggood. No …
“Version 1 of my design for an RC Car using an Arduino Nano and a Seeeduino XIAO. I call this RC_Car_RP. A lot can happen in a few weeks with enough resin and persistence. The first version of my 3D …
“I’ve always had this fascination with lamps, so having the ability to combine 3D Printing and Arduino with LEDs was something I needed to pursue. The concept is very simple and the outcome is one of the most satisfying …
“We will use the Arduino MKR1010 together with MKR RGB Shield with Otto showing his expression with his eyes. Biped Otto with Arduino We set up a biped using the open source file Otto DIY programmed on the MKR1010 WiFi …
“Idea is to make small cheap portable variable power supply for hobbyists. It main purpose is to test some electronic components or to power some projects in their early development or for POC stage. Parts used in project are: - Digital …
“My goal for this project was to design & build a small untethered climbing robot and to record it in my very first Instructable (woohoo!). The result is the robot shared here, which uses a rack and pinion system to pin …
“When the pandemic started, I decided that I needed to ensure that I kept myself occupied during lock down, so I mentioned to my parents that I was thinking about restarting my childhood hobby of electronics. As soon as I …
“In this instructable we will make a portable, variable power supply, using a step down buck converter, three 18650 cells, and a 7-segment display voltage readout. The power output is 1.2 - 12 volts, though the led readout cannot read …
“SoraBot-UVGI is a modular robot for sanitizing surfaces. It is small, it is equipped with self-driving, it is open-souce and low cost. When I started this project, my first thought was that I had to make a robot buildable …