Content for DHT11

WiFi Clock,Timer & Weather Station, Blynk Controlled

“This is a Morphing digital clock (thanks to Hari Wiguna for the concept and morphing code), it is also a Analog clock, weather reporting station and kitchen timer. It is controlled entirely by a Blynk app on your smartphone by …

Home Automation with Mesh Networking

“Till now you have seen many different kind of Home automation using Smart phone, Blynk, Google Assistant, Alexa, Google Firebase or even local MQTT server based as well. But what if I tell you that there is one more method …

Simple DIY Weather Station w/ Raspberry Pi

“Being aware of the weather conditions around you is easy with a DIY Weather Station using Raspberry Pi. Do you ever suddenly get the chills, so you check the temperature inside your room to make sure you’re not paranoid …

Sending Temperature and Humidity Data to the IOTA Tangle

“The project is an attempt to combine the two technologies, MAM and MQTT, to store temperature and humidity information on the IOTA Tangle. The project is an attempt to combine the two technologies, MAM and MQTT, to retrieve and store …

Poultry Egg Incubator with Humidity Sensor

“Pictured below is a controller we recently made for use in a poultry egg incubator, designed to keep eggs within a very narrow specific temperature and humidity range for a few weeks. This is achieved using a heater, a fan …

Automatic IoT Eggs Incubator

“Observe automatic eggs incubation from any location. Eggs Incubation is an interesting topic among the arduino enthusiastic. Basically, it is similar to the type of incubator which can be used as a substitute of poultry chicken to incubate the chicken …

How to Make Smart Home Using Arduino Control Relay Module | Home Automation Ideas

“In this home automation tutorial video, we will design a smart home relay module that can control 5 home appliances. This relay module can be controlled from Mobile or smartphone, IR remote or TV remote, Manual switch. This smart relay …

IOT. Intelligent waste management

“IOT. Smart trash cans that remotely warn if they’re full, if they smell bad, or if they’re being set on fire. Values are sent to ThingSpeak To help city councils or another government institutions my students have created …

Mini Weather Station Using Arduino Nano

“This is a simple and fun project with pocket friendly budget. Introduction Capturing physical data in real time is always fascinating. In this project you will notonly be able to capture three fundamental physical parameters for weatherpredication viz. temperature, humidity …

Monitor temp/humidity and control LED from anywhere!!

“Attractive ‘Remote control panel’ with gauges to monitor data and buttons for LED control. To monitor live sensor data and control the relays over internet there are lot of projects available on internet, in which this task is achieved with …