Other
“Previously, we looked at using registers directly in Arduino and setting up external interrupts. This time, we configure a timer interrupt to toggle an LED every 0.5 seconds. That’s right; we’re going to redo blinky the hard …
“This project is for an Arduino powered 4x4x4 cube of RGB LEDs. I have seen other LED cube projects using mono-colored LEDs and Charlieplexed RGB LEDs. This one is different in that it uses APA106-F5 addressable LEDs. An APA106 …
“In this Instructable, I will demonstrate the construction of a dual-axis, single-mirror laser beam steering module using 3D printed parts and inexpensive components from eBay. This project has similarities to Arduino Laser Show with Full XY Control and Arduino Laser …
“In this instructable I will be showing how you can build a personal X-Y Plotter using simple L293d motor drivers. ie- without Complex Stepper drivers. Warning - Use of H-bridge to drive a stepper is inefficient. features like microstepping cannot be …
“I decided to replace the original car stereo in my Volvo V70 -02 with a new stereo so I will be able to enjoy stuff like mp3, bluetooth and handsfree. My car has some steering wheel controls for the stereo …
“As I was building my SmartHomeDIY platform (OpenSource) one of the first things I was looking for (except of debug tools and board), was a bootloader for Arduino which supports over the air flashing of the internal sketch. I needed …
“The Stomp Shield for Arduino from Open Music Labs use an Arduino Uno and four opamps as a guitar effects box. Similar to the previous instructable that shows how to port the Electrosmash Uno Pedalshield, I have also ported the …
“This post isn’t another How-To tutorial for a specific sensor because the Arduino community has already produced a considerable number of resources like that. You’d be hard pressed to find any sensor in the DIY market that doesn …
“Hello guys For long time I was harvesting lithium ion batteries for powering my projects BUT Sometimes I was getting bad batteries that look fine So Ive made battery tester device that can test the battery and tells you the …
“Small handheld POV display based on Arduino, perfect project for beginners and not only to learn soldering small components and programming. It is simple so don’t worry if you haven’t any experience, you will be easy able to …