Other
“This is my first Instructable. This project uses Arduino and a 2.8” TFT touchscreen with a password sketch to activate a relay that breaks the circuit to a mag lock door. Background, the RFID lock on a door at …
“It automatically supplies meals to your pet at preset times, by providing the daily dose of cat kibble. Having a pet involves big responsibilities, first of all granting them food; unfortunately, a hectic lifestyle and imposed workhours do not go …
“Using Eagle, the PCB I designed is a caliper data interface. This board works with several models of inexpensive Chinese calipers and tire depth gauges. The board allows for either a TTL serial and/or an I2C interface. Through either …
“The main purpose of this project was to build a robot that would differentiate itself from already existing robots, and that could be used in a real and innovative area. Based on personal experience, it was decided to build a …
“Use a joystick to control a classic drawing toy through two DC motors. The Etch A Sketch is a drawing toy with a thick, flat gray screen in a red plastic frame. There are two white knobs on the front …
“Hi everyone, this is my second instrucatable! This time we are going to build a wooden clock with temperature and humidity display. Like shown in the picture, our the time will be displayed through the “wood”. Since light isn’t …
“About three years ago I build myself a motorized camera slider. I didn’t have a 3D printer at that time so I used some old inkjet printer parts and LEGO :) Surprisingly it still works, but not as good as …
“The Background I already explained the motivation of my project in the Card Feeder article. But in short, my children and I have amassed a large amount of Trading Cards by now. The handling, sorting, etc. is very difficult with …
“This is a very simple project that uses the Adafruid library to control a RGB adressable LED strip that will eb inside of a Daft punk Helmet. In this tutorial you will find the STL files to 3D print the …
“The iLumos range of smart light switch and dimmers work very nicely. They install easily into UK as they don’t require a neutral connection which is often not present in UK lighting switch points. They use 433MHz transmissions from …