Other
“BigFDM has a printing area of 800 x 800 x 900mm, its BOM is less than $3,000, and can be made in any fablab near to you! We dream in a future of freedom, where open source hardware and …
“The MidTBot is a small and simple little pen plotter. All of the custom parts are 3D printed. The rest of the parts are low cost and easy to get. The controller uses an ESP32 running Grbl_ESP32 firmware. It can …
“”Colossus Micro” is an animated light display in a portable size. It uses a “P5” LED panel that is controlled by a Raspberry Pi Zero W. Here are its features: Convenient size (12 x 6”) Full color, high resolution LED …
“Rotary phones are fun, the inginuity of the dial in combination with the phone centrals elektromechanical logic made it possible to allow telecommunications to evolve. These wonderfull devices are now disapearing from our desks (for many good reasons). But wouldn …
“This project is an attempt to build a practical USB charging station that you can connect to your solar setup or car battery to allow the simultaneous charging of several USB devices, in my case for camping trips. The unit …
“The inverted pendulum is a classic problem in dynamics and control theory that is generally elaborated in high-school and undergraduate physics or math courses. Being a math and science enthusiast myself, I decided to try and implement the concepts that …
“This is Mover3D. A 3D printed moving light using the industry standard DMX-512 communication protocol for lighting control. Thus, it can plug in to any standard lighting control console, creating the ultimate lighting desk toy. Mover3D features full RGBW …
“Which uses more water - a bath or a shower? I was recently thinking about this question, and I realized that I don’t actually know how much water is used when I shower. I know when I’m in the …
“Ever wake up in the morning found your CPAP mask is off? This device will alarm you if you have unintentionally removed mask during sleep. CPAP (Continuous Positive Airway Pressure) therapy is the most common form of treatment for Obstructive …
“This clock uses a custom built 4-digit 7-segment display made from UV LEDs. In front of the display a screen is placed that consists either of phosphorescent (“glow-in-the-dark”) or photochromic material. A push button on the top lights up the …