Main Content

This project gives Intruder Alert, Door Open Alert, Gas Leak Alert, Smoke Alert and Fire Alert on Telegram Application.

In this project we’ll build a Home Security System using ESP32-CAM Which will notify us on Telegram App about any Intruder trying to break in our house by capturing and sending his photo to us. For that we’ve used motion and Door Sensors. We’ve also implemented Fire, Smoke and Gas Leak Alert system in this project.

In this Home Security Systems project we’re going to

Monitor Doors - (to detect any Forced/Unauthorized Entry)
Detect Motion - (for Intruder Alert)
Sense Smoke/Fire/Flame - (to detect fire in house)
Detect Gas leak
For this we’ll use

Magnetic (Reed) Switch Door Sensors
PIR Motion Sensor Module
Flame/Fire Sensor Module
MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module
Also ESP32-CAM Board has on-board camera, which we’ll use to capture the Photo of Intruder.

Hardware - Components
To build this project we’ll require

AI Thinker ESP32-CAM Dev Board
Mini PIR motion sensor (AM312)
Magnetic (Reed/Switch) Door Sensor
MQ6 Gas/Smoke Sensor
Flame Sensor Module
10k Resistors – 2 Nos
Logic Level Shifter Module
FTDI programmer (to upload code)
Breadboard MB102
MB102 Breadboard Power supply Board
Jumper wires
Battery 7.4V LiPo or Power Bank
USB A to Mini USB Cable (To upload the code)”

Link to article