Main Content

“This Ebook is designed for Guys and Gals who like to create tools and machinery. I hope my Ebook gives you hope that no matter how hard a project may seem, keep plugging away until you finish and you will succeed. I spent 3 years putting this together and now finally all my hard work and research has paid off. I studied diagrams from commercial venders, but to no luck. They tend to leave a lot out on purpose - so its hard to reproduce their design. Ive see different attempts at people making their own on You Tube and other sites, but what a death trap. Messy water resistors and wiring like a darn Christmas tree. So I began reading books and articles on their workings and took my home schooled-knowledge of electronics to build my own plasma cutter. I was determined; failure was not an option. I started by collecting parts from old microwaves, stoves, water heaters, air conditioners, car parts and more in the hopes of creating a low budget way to create a plasma cutter for myself. I mounted it all on a simple piece of scrap wood; well its scrap wood now. We, didnt need that table anyway (shhhhhhh dont tell the wife). Then one day it all came together. I hit the power switch, placed the head to the metal, started the arc, felt the air kick and then a second hard kick (the current being drawn into play). Then BAM, it was slicing through quarter inch steel like a hot knife through butter. How sweet it sounded! I felt the amazement of completing a project that I just couldnt let go of. So, take your time, enjoy and be safe. The Plasmaman”

Link to article