“AM Radio transmissions are based on a carrier signal which is modulated by the audio signal. It’s a very basic principle but prone to noise from the environment. Using the ESP32 it is really simple to generate an analog signal using the built-in DACs. With the provided code here just a wire as an antenna has to be connected to the pin 25 of the ESP32. The transmission will end up on the AM frequency ~835kHz.”
Related Content
Related Posts:
- Build a One-Handed Soldering Tool 2.0 | Effortless Soldering With Only One Hand
- Digital Hourglass
- Sen6-PDU: a Smart Power Distribution Unit
- Set a DS3231 RTC Over Bluetooth
- Synesthetic Clock
- Building a Basic ESP32 Web Server - controlling LEDs
- Differential drive robot using ROS2 and ESP32
- DIY Thermal Camera
- DIY Thermometer with TTGO T Display and DS18B20 V2
- Ili9341 pattern lock algorithm