“Introduction:
Hii Everyone here we are going to learn about Saving the water efficiently. so go through the steps and the Sentences carefully. Water tank overflow is a common problem which leads to the wastage of water. Though there are many solutions to it like ball valves which automatically stop the water flow once the tank gets full. The water level controller circuit is a simple mechanism to detect and control the level of water in the overhead tank and also in the other containers. Nowadays, all the householders/owners are storing the water in overhead tanks by using the pumps. When the water is stored in the tank, no one can identify the level of water and also, no one can know when the water tank will fill. Hence there is an overflow of water in the tank, thus there is a wastage of energy and water.
To Resolve this type of problems by using the water level Controller circuit using BC547 transistor it helps and control the overflow level of water. The cost of the water level controller manufacturing cost is low and its use full for the overhead water tanks, swimming pool boilers, etc.. The water level controller circuits are used in the factories, chemical plants, and electrical substations and also in other liquid storage systems.
This simple transistor based water level controller circuit is very useful to indicate the water levels in a tank. Whenever tank gets filled, the motor Switches off. Here we have created 3 levels (Main, Low, High), we can create alarms and LED for more levels as we need. When tanks gets filled completely the motor will Turn Off.”