Content for STM8S103F3

STM8S103F3

The STM8S103F2/x3 access line 8-bit microcontrollers offer 8 Kbyte Flash program memory, plus integrated true data EEPROM. The STM8S microcontroller family reference manual (RM0016) refers to devices in this family as low-density. They provide the following benefits: performance, robustness, and reduced system cost. Device performance and robustness are ensured by advanced core and peripherals made in a state-of-the art technology, a 16 MHz clock frequency, robust I/Os, independent watchdogs with separate clock source, and a clock security system. The system cost is reduced thanks to an integrated true data EEPROM for up to 300 k write/erase cycles and a high system integration level with internal clock oscillators, watchdog and brown-out reset. Full documentation is offered as well as a wide choice of development tools.

Description Source

Project  Tim’s I2C Intelligent DC Motor Driver

Tim’s I2C Intelligent DC Motor Driver

“This is a DC Motor Driver that is controlled via I2C. The I2C Address can be set in the range: 1 to 127. It can read a Quadratic encoder. I am working on a project that needs about six Motors …

Project  Wakeup Light

Wakeup Light

“As I write this instructable it is mid winter on the Northern hemisphere and that means short days and long nights. I am used to getting up at 06:00 and in the Summer the sun will be shining by …

Project  Using a STM32 Like an Arduino Tutorial | STM32F103C8

Using a STM32 Like an Arduino Tutorial | STM32F103C8

“In the following tutorial, we will be looking at the different microcontrollers offered by STM like the STM32F103C8, STM32F030F4 and STM8S103F3. We will be comparing these micros to each other along with comparing them to the Arduino. Once that is …

Project  Homemade STM8 Development Board

Homemade STM8 Development Board

“A simple development board for STM8 was made by thermal transfer, with only the programming and reset functions. The drawing time is long, mainly without the TSSOP20 package. The production time is very short, and it will be done in …