Other
“Donald Bell of Maker Project Lab (https://makerprojectlab.com) pointed out in his November 29, 2017 update (https://youtu.be/cQzQl97ntpU) that the “Lady Buggy” chassis (https://www.instructables.com/id/Lady-Buggy/) could be used as a generic platform. He …
“Record and play servo robotic arm In this project i used four mini servo and four potentiometer Read from potentiometer is record to arduino board in teach mode and those steps are payed in loop in play mode. To make …
“This machine is built using cheap materials and doesn’t cross 7$ to build. To build this you need some patience and 2hours of time. And you must be familiar with soldering and wiring since this involves a small circuit …
“Hello, Everyone. This is a series of courses, I will share how to use cartons and arduino to make something interesting.Today, I’ll show you how to make a Rock-paper-scissors robot.”
“This is a guide for creating a 3-axis handheld camera stabilization rig for a GoPro using a Digilent Zybo Zynq-7000 Development Board. This project was developed for CPE Real-Time Operating Systems class (CPE 439). The stabilizer uses three servos and …
“This instructable was created in fulfillment of the project requirement of the Makecourse at the University of South Florida (www.makecourse.com). Hello guys, This is my final project for the Make Course at USF. We were able to build …
“Perhaps you remember an “As Seen on TV” product known as “The Clapper” in the 1980s and 1990s. The TV commercials could be seen on almost every channel. The premise was simple: a 120 VAC relay would control power to …
“In this project, we build a Raspberry Pi M&M Color Sorter to sort red and green M&M’s for Christmas! The Raspberry Pi M&M Color Sorter Need to sort out green and red M&M’s for …
“This will be the first project in a series entitled: “Optimised Laziness: Over Engineered Solutions to Remarkably Trivial Problems” Ever been lying in bed late at night reading or watching Netflix on your laptop? The worst part is of course …
“In this instructables I will show you how to make your own Egg-Bot controlled with Arduino. I wanted to make it before but I thought it is too hard for me but I was wrong. It’s easy to build …