Other
“I have always been intrigued by robots, especially the kind that attempts to mimic human actions. This interest led me to try to design and develop a robotic biped that could imitate human walking and running. In this Instructable, I …
“IoT - Eggs incubtor over the internet, with data collection using CavyIoT service Eggs Incubation is an interesting topic among the Arduino enthusiastic. Basically, it is similar to the type of incubator which can be used as a substitute of poultry …
“I recently found myself binge-watching a lot of Netflix series due to the current situation, I hope you all are safe, and I saw that season 5 of the Black Mirror was released. An anthology series that revolves around a …
“In need of a good argument? Try the argument bot! A robot based on Monty Python’s Flying Circus argument sketch.”
“Arduino 2 / 3 axis robotic arm with a robotic claw gripper. I made this project for those who don’t want to, for some reasons, buy a robotic arm from the store. The reason I started this project is that …
“Robot arm and its controller. The robot arm uses three conventional PWM servos, and each angle is controlled by a variable resistor. The rotary potentiometer used B curve 10kohm. Two DS3115 servo motors were used in the vertical direction, and …
“Imagine that you decide to go to the beach on a sunny day, to relax your mind and recharge your energy. Sounds awesome! Unfortunately, as you arrive to the beach, you will be shocked by the tremendous amount of garbage …
“It’s an Open Source and printable manipulator with five degrees of freedom. Which was designed and created by MMH_Team. The main purpose of this project was to create a robotic arm that could be made by makers around the …
“Thats a job i do in my high school. it is a robotic arm full 3d printed, contoled with arduino. i hope you like it!! and sorry for my english i’m from catalonia and i have 20 yeras old …