Mega2560 Pro Mini

The Mega Pro MINI CH340G / ATmega2560 board is based on the ATmega2560 microcontroller and the USB-UART adapter CH340. The board is compatible with Arduino Mega 2560. The board has a compact form factor of 38X52mm and is an excellent solution for developing projects based on ATmega2560. The Mega Pro Mini functionalities are identical to the Arduino Mega 2560. Even though it is an Embed board, it is solid stable as the Mega Board. It uses the original chip, and a 16 MHz high-quality quartz resonators is present on the board. The board doesn’t have a USB interface. In order to connect Pro MINI to a PC you have to use USB-TTL converter. The board can be powered through the power PIN Vin). The maximum output current upon 5V is around 800mA, while on the 3.3V it is about 800mA.

Main Content

Interactive Subway Info Display With Voice Instructions. Demo

“I started designing the Display for The New York City Subway, then I changed to London City Subway… but hey! My city has a Subway too! So without more doubts I made it for my City Subway, Valencia (Spain). All …

How I Made My Own DIY “Pixelstick” for $22

“You might know the Pixelstick. “nothing compares” is one of their statements. And this is true. At least price-wise. The Original Pixelstick retails for EURO 399,– here in Germany. I have always wanted one to at least try out some …

3D Printed 18DOF Hexapod

“Hi In this instructable, I will show you how I made this hexapod robot.When I was designing it my main goal was to make it small,3d printable, and it needed to look good on top of that.At …