Other
“Last year, I published an Instructable which was aimed to replace all IR Remotes with a new device - only the device could hold 4 codes and only accessible through iOS devices. In an effort to help solve this problem, I …
“Line follower is an autonomous robot which can detect a specific colored line painted on a surface of different contrast, such as white on black. In this project I used infrared transmitters and receivers to track the black strip on …
“Hello makers! this is an instructable to build a working USB IR receiver using an Attiny85 microcontroller. I started this project to overcome the lack of support (at least complete support) for some IR remotes in the GNU/Linux OS …
“This is part one of a two-part project. For part one, we will focus on IR remotes and signaling, as well as IR reception and decoding. Using IR (InfraRed) radiation to control electronic devices is widely accepted and implemented. IR …
“Robotic arms are cool - I especially love the EEZYbotARM by theGHIZmo. I printed the parts early last year, but didn’t get around to assembling it until last month. I designed my own Arduino-based controller for it and decided to …
“This is a modification of my simple IR light dimmer v1 that you should also check out. Modification is mostly in hardware so that dimmer does not require both phase and neutral wires to operate. I am releasing source code …
“Control up to 8 devices by this easy constructable remote control. It can work as a radio or infrared remote control, depending on the components. Each device output can be configured to be momentary (turned on while you press the …
“Control anything with your remote control. This receiver works with RC-5 and NEC format IR remote controls, depending on the firmware used. The receiver has 11 output channels, and each channel can have up to 4 buttons (on, off …
“Finding a free parking lot in a congested city like Dhaka is very hard. Here, if anyone wants to go outside from home with personal car first thing comes in his mind is about parking, where he will park his …
“It all started with this Instructables : Intructables Christmas Tree . So I decided to make it in the FabLab in my town (Strasbourg, France) (http://www.av-lab.net/). The frame is cool, but I wanted more. So I decided to add …