Other
“Hello everybody! How do you do? This is project How-ToDo my name is Konstantin, and today I want to show you how i made this Geiger counter. I started to build this device almost from the beginning of last year …
“I’d like to show you my homemade multi-channel-analyzer for gamma spectroscopy using a.) the freeware theremino and b.) an arduino. First of all I have to say some words about gamma spectroscopy at all. To detect radioactive decays you …
“Open-source, easy to build IoT dosimeter with sensors and internet connectivity to centralize data. Intended as open source for those who want to build their own dosimeter with their own tools, this is an IOT device that can take several …
“The ESP8266 is flashed with the MicroPython firmware, and the software PWM is used to drive the HV part of the circuit. The radiation and dose information will be available via a web interface, MQTT, maybe some lower level output …
“Have you have ever wanted to test the radioactivity of your smoke alarm, or have you ever wanted to be extra prepared for that nuclear apocalypse that is always being spoken about? If you have, then this instructable is for …
“The GeigerMüller counter is a relatively simple tool to measure ionizing radiation. To increase sensitivity, construction presented here contains three (instead of one as usually) soviet STS-5 lamps. This is important for measurements of natural sources of (low) radiation …
“Exactly 30 years ago a great disaster struck the region of Chernobyl: a nuclear accident occurred that released a large quantity of radioactive particles into the atmosphere. And it is only five years ago that, with the Fukushima Daiichi nuclear …
“The GeigerMller counter is a relatively simple tool to measure ionizing radiation. To increase sensitivity, construction presented here contains three (instead of one as usually) soviet STS-5 lamps. This is important for measurements of natural sources of (low) radiation …
“I wanted to build an environmental monitor. Partly to see what happens from day to day and also because I wanted to compare all the different MQ Sensors and see how they respond to different things. Using a Linkit one …