Content for DS3231

Project  masterclock

masterclock

“Slave clocks are old school clocks mostly used in train stations, hospitals, factories, etc… places that needed to have accurate timekeeping and synchronized clocks in a lot of places. A master clock was responsible for keeping time and controlling all …

Arduino Colorful Clock++ Using Neopixel Strip

“Features of the clock: Arduino micro-controller based; Hardware & enclosure procured from local stores; RTC controlled by battery; All functions controlled via IR remote control.; Multiple modes of Display: Dot mode, Seconds arc mode, Minutes arc mode, Hours Arc mode, All …

Wordsearch clock

“Every maker makes a word clock at some point, and I guess this is my turn. I didn’t want to make the same thing as everyone else though, so I put my own spin on it. Why have a …

Arduino Programable Thermostat

“This project uses an Arduino Nano, a RTC, a rotary encoder, a Nokia 5110 display and a relay. It allows manual and programmed setting of temperature, and furnace control.”

Retro Pac-Man Clock

“Build an interactive Pac-Man bedside clock, with a touch screen, and animated Pac-Man figures. This cool project is surprisingly simple to make and is a great gift for those nostalgic Pac-Man addicts. As well as being able to interact with …

Ai Weather Presenter #StephenHawking

“Over the last 18 months I built an autonomous GPRS weather station and, in the final step, created an audio interface to communicate the data with Stephen Hawking’s voice emulator, the Emic2. This gadget reads an online php file …

Thermohygrometer with clock and LCD display on Arduino UNO

“These 7 steps will drive you through the “construction” of a thermo-hygrometer with clock on Arduino UNO. Data and time, humidity and temperature will be shown on a LCD 16x2 display .If you have purchased a LCD display and want …

DIY Alarm Clock

“After designing the “Clock Set Date Time” and hearing the suggestion of “maewert” I thought it would be a good idea and also useful, add a “wake-up alarm.” A small change to the code and adding a few components: Here …

DIY Aquarium Controller

“In this instructable I wanted to show you how to make the aquarium controller. There are many controllers available in the Internet, but they cost at least $100. My controller costed about $15. Another great thing about making your own …

Arduino Binary Clock - 3D Printed

“I’ve been looking at Binary clocks for some time for my office desk, however they’re quite expensive and / or don’t have a huge amount of features. So I decided I would make one instead. One point to …