Content for DHT22

AtticTemp - Temperature / Climate Logger

“High tolerance temperature gauge and climate logger for your attic or other outdoor structures”

Arduino GrowBox Controller

“This GrowBox Controller handles temperature, humidity, fan and lights, and configuration is made via web server. CSV logs and remote cloud! Arduino GrowBox Controller is available on GitHub. I finally shared, with GPL3 license, the firmware I developed in theese …

Aurdino Weather Station

“Ever wanted to make your very own Aurdino Weather station? Well, now is your chance! Through this instructable, you will learn the basics of how to build an Aurdino Weather Station as well as learn the code behind it. At …

ST Connect (Dike Monitoring)

“ST Connect is an autonomous connected object that collect and send data, in order to monitore dikes in the Barcellonette. #PolytechSorbonne Story Introduction During our studies at Polytech Sorbonne in 2018, Earth Science teachers needed to monitor dikes in the …

TTGO ESP32 LoRa Board With DHT22 Temperature and Humidity

“My goal is to collect data over a larger distance than achievable with protocols like Wifi. I need a large amount of nodes and I also want to power the senders with batteries for the simple reason I do not …

Data Center Monitoring by IOT ESP32

“Are you familiar with SNMP (Simple Network Management Protocol)? Its used to control services and equipment on the Internet, as well as for device management in IP networks. I decided to use it in a project similar to one that …

Connected Thermostat

“Monitoring accurately the temperature in your home is definitely one of the best way to save on your energy bill. At the same time you want to feel well in a warm home during winter time. My current thermostat only …

Arduino Mega + WiFi = Automation

“Today, Ill talk about an assembly that was suggested by many followers: Arduino Mega + ESP. This will include an automation project with 16 relays, three sensors, and a smartphone. Well make a Web Server for the Arduino Mega using serial …

Arduino Weathercloud Weather Station

“I made a weather station connected to internet. It measures temperature, humidity, pressure, rainfall, UV index and it calculates few more important meteorological values. It then sends this data to weathercloud.net, which has nice graphics and UX. It also …

Improved WeatherStation 20x4

“Temperature, humidity and barometric pressure showing a comparison to a previous point in time and graphing the trend. Story I wanted to get more meaningful information from a basic temperature, humidity and pressure setup and I figured the way to …