Main Content

In this article,I will explain how to assemble the 4 channel LM35 amplifer board we made.
This instructable requires that the user is comfortable operating and using a soldering iron.
Reading resistor Colour codes or using a multimeter to find out the resistor

Supplies:

- 100nF Ceramic Disc Capacitor
- 10uF/16V Electrolytic Capacitor
- 1N5819 Diode
- 10K Resistor
- 27K Resistor
- LM324A DIP-14
- PCB
- LM35
- Shielded Wire
- Heat shrink tubing
- Soldering Iron”

Link to article