“I always wanted to have a sturdy and rigid Raspberry Pi that is mobile and as small as possible. Recently I designed a Raspberry Pi 3 plus 5 inch display, built-in keyboard and a battery / charging circuit. It’s nice as it’s about a DIN A5 paper sheet.
Then I came along these USB boards that you can pogo-pin to your Pi Zero which is similar in design to what the guy at NODE did.
When working with a Pi Zero, I wanted to connect via VNC so I can run Pixel desktop and Geany on the Pi to develop and run software. When doing so, you quickly want the Pi to display the Wifi and IP address it’s connected to. I chose an e-paper display from Waveshare (do yourself a favor an buy the balck/white display only, not the one with three colors as they don’t support partial update, i.e. they refresh very slowly!) and bought such a USB power board and attached the Zero to a battery:”