“Build your own Arduino-Based Memorization Game!
In this game, one RGB LED will flash 3 random colors at the start, you will need to remember the color of each one. See where this is going? You’ll use a potentiometer to change the second RGB LED and press a button to record each color from the first RGB LED. The second RGB LED will show you which color you have selected, and once you have recorded the sequence the RGB LEDs will either flash green and a sound will play from the buzzer signaling you have correctly guessed the sequence or both RGB LEDs will flash red and it will reset the sequence count back to 3* (this can be changed). You start the game off with having to remember the 3 colors shown, then if you correctly select the colors show, another random color will be added in the sequence. This will continue until you get one wrong, and like said above it will reset back to just 3 colors.
It’s a really fun, addicting, and annoying game to play :)
THINGS YOU WILL NEED
1 x Arduino UNO R3 1 x Potentiometer1 x Push Button2 x RGB LEDS8 x 220 Ohm Resistors1 x Piezo Speaker18 x Jumper Wires (Male to Male)OPTIONAL
1 x Shield Board
In the picture above I created a shield to show my friends at school, but it’s completely unnecessary. If you’d like to go this route you’ll get a soldering iron, some solder and patience. If you’d like to go this route feel free to message me and I can help you if you have any trouble.”