I will show you how to convert your old boring fan into a nice glowing fan.

I want to use 2 LEDs so I need to drill two 5mm hole.
The LED direction is very important!!! Please take a look at the picture.
After drilling the two holes I used a 3V battery to test LED in the hole to make sure it will work fine. (fan should turn on while testing)
I used superglue to glue the LED into the fan and the fan was turned on so i was sure that the LED won’t touch the blades.
LEDs are connected to the fan’s power cable and it’s ready to go. :)
Transparent fan is the best for this project.”

Link