“Hi all! After a couple of months with a lot of work, I come here again with the last board I develop before Christmas. Its a dual USB serial and I2C converter based on two MCP2221 Microchip 2.0 USB-Serial bridges. I develop it as a need on my work with the last project Im involved. I need to monitor a serial communication between two devices. With only one converter, I must choose between RX and TX lines to monitoring the traffic. With this solution, I can listen at the same time TX and RX lines, so the monitoring is more easy. And with a software like Docklight (you can download a free evaluation copy here), you can choose the monitoring option to display both channels. After the break you can find all the technical info of the board!”
Related Content
Related Posts:
- Low-cost USB Sniffer (LS/FS/HS) with Wireshark interface
- USB Power Isolator
- USB PD Inverter
- USB Killer Detector
- USB Power Tester based on ATtiny45/85
- Easy DIY Tiny USB Hub For Raspberry Pi Projects
- USB-LED-Otter
- PocketAdmin – Keystroke Injection Device
- The USB-C Explorer
- MemType USB Stick With All Your Passwords