Content for Sensor

Project  Sourbot

Sourbot

“The goal of this project is to keep a sourdough starter alive by feeding it with flour and water over time. The feeding may be done scheduled, automated with sensors or manually. All possible thanks to this sour robot “

Arduino Vu Meter Using A Sound Sensor

“Make Led’s Dance at the Music with a sound sensor and a Arduino UNO Following the Beats of music with Simple code using basic Math.What is a Vu-Meter?If you don’t Know what is a Vu Meter …

DIY Logging Thermometer

“I wanted to make this project to learn how to integrate several modules into a working model; and also I have a practical need for monitoring temperatures in various places. The most recent need is to monitor a chicken brooder …

Home Monitoring With Wireless Sensor Nodes

“Do you want to build an IoT-enabled home monitoring system that can measure environmental parameters and also detect intrusion but don’t know where to start? This easy tutorial will deliver everything you need with only two major components: a …

Measuring weight using a load cell & PSoC

“This project describes the making of a simple weighing scale using the Cypress PSoC Analog Coprocessor and a weight/load sensor (also known as a load cell or strain gauge). A Load cell is a transducer which converts the applied …

PSoC 4: Natural Gas Leakage Alarm System for Kitchen Safety

“An Analog Heavy System that detects leakage of NG (Methane) from Stoves, Gas Cylinder, Tubes inside Kitchen & generates Audio-Visual Alerts”

ESP8266 Geiger counter

“The ESP8266 is flashed with the MicroPython firmware, and the software PWM is used to drive the HV part of the circuit. The radiation and dose information will be available via a web interface, MQTT, maybe some lower level output …

Project  Body Sensor

Body Sensor

“An Arduino and two insulated, twisted wires can be used to detect an approaching human (or animal). I set up a sample circuit to warn approaching people away from my desk. The voice module in this instructable is optional—you …

Remote Water Tank Level Sensor V2.0

“This project is a re-boot from a 2-year-old project to accomplish the same. The goal is to have an internet-enabled sensor mounted to a water tank which measures the amount of water in the tank and records it online. When …

GeigerMuller counter that can work with Arduino or (almost) any evaluation board

“The GeigerMller counter is a relatively simple tool to measure ionizing radiation. To increase sensitivity, construction presented here contains three (instead of one as usually) soviet STS-5 lamps. This is important for measurements of natural sources of (low) radiation …