Content for RN-42

RN-42

The RN42 is a small form factor, low power, highly economic Bluetooth radio for OEM’s adding wireless capability to their products. The RN42 supports multiple interface protocols, is simple to design in and fully certified, making it a complete embedded Bluetooth solution. The RN 42 is functionally compatible with RN 41. With its high performance on chip antenna and support for Bluetooth® Enhanced Data Rate (EDR), the RN42 delivers up to 3 Mbps data rate for distances to 20M. The RN-42 also comes in a package with no antenna (RN-42-N). Useful when the application requires an external antenna, the RN-42-N is shorter in length and has RF pads to route the antenna signal.

Description Source

See alsoBlueSMiRF

Project  Log High Speed ECG or Other Data, Continuously for Over a Month

Log High Speed ECG or Other Data, Continuously for Over a Month

“This project was developed to support a university medical research team, who needed a wearable that could log 2 x ECG signals at 1000 samples/sec each (2K samples/sec total) continuously for 30 days, in order to detect arrhythmias …

Project  Control all your IR appliances through Bluetooth (or internet)

Control all your IR appliances through Bluetooth (or internet)

“A Bluetooth enabled remote that will help you control one or more IR-controlled electric payloads. In this post, we are going to present a project for emulating an IR remote control composed of a RandA board (an Arduino that …

Project  Bluetooth HID gamepad using HC-05 module

Bluetooth HID gamepad using HC-05 module

“This project draws hugely on the work of other people. Part one explains how to load an HC-05 module with the firmware from the RN-42 without the need for a parallel port programmer. Part two builds an example …