Other
“This is a simple oscilloscope made with STC MCU. You can use this Mini DSO to observe waveform. Time Interval: 100us-500ms Voltage Range: 0-30V Draw Mode: Vector or Dots.”
“Oscilloscope made using the Arduino and OLED 0.96 “display i2c. The oscilloscope has 4 buttons: the first is used to switch between options, the next two are used to change the value smaller / larger, the fourth button freezes the …
“The Probe-Scope is an open source 60MHz 250Msps oscilloscope probe with all guts built right in, that plugs directly into your PC via USB The Probe-Scope is a 60MHz Bandwidth, 250Msps Open Source oscilloscope, in the form factor of a …
“An open source firmware for JYE Tech DSO-150 Digital Storage Oscilloscope Fully open source firmware for JYETECH DSO-150 https://www.jyetech.com/Products/LcdScope/e150.php Complete rewrite of DSO-150 Firmware - No longer DSO-138 compatible (Sorry …
“Why would I want a tiny oscillscope? I’ve got a room full of electronic Stuff including four oscillscopes. But it’s a fuss using them. It would be nice to have something that fits in my pocket, that sits …
“Fast, Portable and Affordable Oscilloscope and Inductance Meter. Don’t be deceived by its small size. This little beast has an inductance meter and a oscilloscope with sampling rate of 1.7 MS/s, based on a STM32 running at …
“Why you do this ?” Because it’s cool and it makes me feel so nerd. And everyone love nerds!”
“First, lets go over a few basics. An oscilloscope is a tool for visualizing changing electrical signals. Oscilloscope: Oscillation (changing), scope (viewing). Together they make “oscilloscope”! An oscilloscope works by plotting a voltage over time. That way, you can very …
“An oscilloscope is a laboratory instrument commonly used to display and analyze the waveform of electronic signals. In effect, the device draws a graph of the instantaneous signal voltage as a function of time. A XY Plotter is an instrument …
“I tried to make simple and cheap oscilloscope using common parts from today’s component retailers. When creating, I tried to reduce the number of parts, while maintaining the minimum necessary for the functionality of an oscilloscope - for different settings …