Other
“In this Project we’ll make a MOOD Lamp from nodemcu & neopixel and which can be controlled by any browser using local webserver. Hello guys in this instructables i made MOOD LAMP based on Neopixel LED Ring with Nodemcu ESP …
“On a previous tutorial, we explored how to control a Raspberry Pi using Jupyter Notebook: RPI PHYSICAL COMPUTING USING JUPYTER NOTEBOOK It was a great experience, and once the project worked very well I thought, “how about to also test …
“Wouldn’t it be great to Turn things on or off with the help of Google assistant..!!! So In this Instructables, I will show how to control any electrical appliances with the help of Google assistant, just like Amazon’s …
“This is a clock and decorative RGB Led Matrix It’s controlled by a Colorduino Shield and NodeMCU v3 Board using i2C communication. With Blynk app you can setup the alarm,change colors and other things. Parts list is: LoLin …
“Internet Of Things will soon become a $6 trillion dollar business. But installation of IOT into existing houses would require massive amount of work. Drilling walls, check for proper grounding, replacing entire lights and fans, etc. But is there a …
“My washer and dryer are two appliances that I’ve wanted to make “smart” for a long time, or at least smart enough to balance out how dumb I am about remembering to empty them when loads are finished. On …
“I did it the hard way not using a Arduino but a stand alone micro processor, a PIC18F2550. This involved digging down into the registers and timings of the Micro to write the code, some of which contained assembly. This …
“In this tutorial we will show you how to use a NodeMCU and a relay board that can be used to control things like solenoid valves. We are going to use the readiness.io platform to observe a sensor (in …
“This tutorial will show you how to make your own tipping bucket rain gauge with a wifi enabled Arduino device that automatically sends data back to an online platform of your choice. In our case we are sending the data …
“The device can be connected for example to the IFTTT system and react when a new mail appears. At app.remoteme.org we will generate a link after calling which bytes will be sent to Arduino, and Arduino will display …