Other
“This innovation comes from the hand movements that can controll a robot. In this project i use flex sensor and i am taking the flex sensor reading and putting this reading on to the intel edison. as a analog value …
“I have designed a few robots using the Arduino Uno and the Adafruit Motor Shield. Both are great for prototyping. But I found myself taking my robots apart every time I needed to build another robot. It’s not cost …
“The story of this motor shield is that I wanted to make a robot for my multifunctional brainwave controlled system and I decided to share this with you. It’s a very simple circuit I used the L293D IC that …
“In This project I will guide you on how to easily build your own Mini-CNC machine and with a low cost (using arduino and scraped old DVD/CD drivers). I decided to write this detailed tutorial in order to …
“This tutorial serves as a short introduction to Robotics using MSP430 microcontroller and Launchpad development board from TI.Here we will build a small differential powered robot from scratch using MSP430G2553 controller and L293D motor control chip.”
“In this project I will show you how to easily build your own low-cost Arduino Mini CNC Plotter! This project is an update from my previous cnc, with better construction and with more accuracy. I decided to make this detailed …
Today we will build a circuit to control DC motors. Electric motors of all kinds work thanks to electromagnetism. They convert electric energy into mechanical energy. DC motors are relatively simple control motors. They are motors that have two modes …