Other
“This project was inspired by the Waag Society’s Biohack Academy: https://biohackacademy.github.io/ https://github.com/biohackacademy One of the Biohack Academy’s components is a peristaltic pump. This Instructable builds on the model provided by adding a …
“Creating finger tines with the table saw PTS10 using a motorized device.The aim was to create a device that allows me to quickly and easily produce finger-tine connections on the table saw. The respective workpiece is moved on a …
“What’s a photography turntable? Photography turntables are round docks used by photographers to take images or videos of objects or people in 360°. The idea is that the object itself sits in the exact middle of the plate, while …
“The Raspberry Pi drives the focus stacking rail to achieve tiny micron movements of the camera towards the photographic subject. Hardware This project is a sub-section of my larger project on focus stacking of fern gametophytes. This section explains what …
“This instructable describes an A2 plotter made from low cost aluminium extrusion, a piece of particle board, two NEMA17 stepper motors, and a few belts and pulleys. The plotter is: - high resolution (80 steps/mm), - fast, - low-cost, - and scaleable The …
“This instructable shows how to improve the accuracy and resolution of the plotter described in https://www.instructables.com/id/CNC-Dual-Arm-Plot…The accuracy was improved by using: thick aluminium shoulder arms to prevent sideways flexing. metal sleeves at each …
“This is my homemade CNC machine using Arduino, Easydrivers and old CD-Rom(s). I use Grbl and G-Code sender to execute the G-Code. In this project we will scavenge parts from old PC CD-Rom(s) and build a …
“The Arduino controlled Roller Curtain arises under the need of light and visual control that responds to the specific sun cycle in each room. It starts from observing the routine behavior we have to open and close our curtains; Arriving …
“It is using Arduino Duemilanove + GRBL (0.8c) + 100mW blue/ violet lazer with external battery power supply (5V) Drawing program is inkscape + gcodetools, gcode sender is Unversai G Code Sender. I want to share with u but it is really …
“I have been always wondering why the watch winder devices are so expensive. Such a tool is, however, necessary especially for guys like me who don’t wear their watch everyday. So, I decided to make one of my own …