Other
“There are many projects to recycle old DVD players in mini CNC plotter (CNC Plotter) based on Arduino. It’s a fun project and ideal for beginners with its Arduino but the mechanical construction and especially the pencil holder can …
“Since I started building DIY CNC, I checked the free, opensource motor controller. There are several alternatives. I chose linisteppr controller.”
“In this project I will show you how to easily build your own low-cost Arduino Mini CNC Plotter! For X and Y axis we will use stepper motors and rails from two dvd/cd roms! Printing area will be max …
“This is my 2nd Instructable and my 2nd Arduino powered CNC, this time around I up the difficulty level by deciding to make a self contained CNC unit by design my own electronics enclosures and placements. The steps of this …
“In This project I will guide you on how to easily build your own Mini-CNC machine and with a low cost (using arduino and scraped old DVD/CD drivers). I decided to write this detailed tutorial in order to …
“A couple of months ago, there was a CNC challenge here at instructables, while checking out the entries of that contest, I saw some pretty cool engraving machines and I thought: “Why shouldn’t I make my own?”. And so …
“Step-by-step instructions on how to build a low cost CNC machine controlled with an Arduino Uno!”
“This machine is designed to make the laser engrave in wood and opaque plastic, having an Arduino and the GRBL as machine automation basis. The machine axis are just the X and Y axis, which move a laser with power …
“Already for a few months or even years, I was planning to build my own CNC milling machine. Now I decided it was time to do it! I read a lot about other DIY projects and in the end I …
“The EtchABot uses an Arduino to turn an Etch A Sketch into a self-erasing CNC (Computer Numerical Control) drawing machine. It’s far from the first motorized Etch A Sketch on the internet. Other projects have used stepper motors to …
“The CNC bubble iris makes big soap bubbles in a new way, by weaving soapy strings together and apart with a motorized iris. It was designed to allow large soap bubbles to be made automatically with great repeatability, opening up …
“What hobbyist doesn’t want a CNC machine? But realistically, how many can really justify the need for one? Not me, but we did want to learn about CNC machines and experiment with GCODE. If you are wanting to do …
“You may not know it, but your old computer CD ROM drive is a treasure chest of useful components. Inside youll find stepper motors, rare earth magnets, bearings, and coils. Its enough futuristic-looking greeblies to construct your own Star Wars …