Other
“In this project we will be making a wireless side lamp that can be controlled via Bluetooth connected to an Arduino UNO to switch on and off the lamp right form your smart phone (Android only) . For the 2D-design we …
“This is my first project for the 4 legs robot and it took me about 1 year development. It is a robot that relies on calculations to position servos and pre-programmed sequences of legs. I’m doing this by handmade …
“Recently I attended a course in our University of Electrical Engineering and we were making ourselves a small weather station. It included learning about soldering, sensors and arduino. It was super fun making it with little kids and other high …
“Hi folks! Last few days I’ve been obsessed with the idea to make my own watch from arduino parts, but something cool I could use and say I did it myself. So I found out there was a sensor …
“Welcome to the never ending saga of Andy and his reflow controllers. About a year ago I published a project writeup showing how I built a PID-based reflow controller. It featured a 640x360 graphical LCD from the Sony U5 …
“Time displayed on large 1” (26mm) 7 segment displays with secondary 4x20 LCD information display. The clock can be used stand alone or provides the following pulses to drive slave clocks 1 sec alternating, 30 sec, 1 min , 1 hour …
“The idea behind the voice controlled / autonomous 3D scanning rig is to allow for a 3D scanning capture to work as smooth as possible with the minimum effort for the person how is scanning as for the person how is …