Main Content

DVD Laser Scanner Microscope

The laser scanning microscope is a special light microscope which uses a focused laser beam to scans the sample. The scanning of the laser across the sample is done by driving the laser in x and y direction. The image is composed in the software by combining the measured light points.

The DVD Laser Scanner Microscope is build from two DVD pick-up heads. The laser of the DVD head is used to illuminate the sample at a tiny spot, focused with the DVD heads own focusing mechanism. The deviation of the laser is done by the pick-up heads lens moving coils.

Confocal Fluorescence Microscopy
A special case is the confocal laser scanning microscopy that enables the reconstruction of three-dimensional structures from sets of images obtained at different depths. Confocal laser scanning microscopes are often used in combination with fluorescence to study properties of biological samples such as cells.

Image Resolution
The resolution of the image is defined by the number of measurements taken in x direction and the number of lines in y. The maximum resolution is limited by the numerical aperture of the system’s objective lens and the wavelength of the laser as in conventional optical microscopes. In fluorescence observations, the resolution is often limited by the strength of the signal. More sensitive photo-detectors or increasing the intensity of the illuminating laser can compensate.”

Link to article