“This time its a obstacle avoiding robot, which use a ultrasonic sensor , two motors , a motor driver and arduino unoto avoid objects. In this project a servo motor is shown but it is not used.It happens because I didn’t find a ultrasonic bracket and I try to make one by my self it was successful but it was programmed to rotate and find the nearest area to go but it didn’t rotate properly so I reprogrammed it not to rotate and if it detects a object it must go backwards and turn to right and continue the process. It is not a big problem and you can find a ultrasonic sensor bracket and fix it to the servo motor. I will put both codes, with servo and without servo. And lets make it!!!”
Related Content
Related Posts:
- Arduino ESP32 All in One Robot
- 3D Printed Obstacle Avoiding R2D2 Using an Arduino Uno in 13 Steps
- Seeds Sowing Robot
- M1 Rover
- Bluetooth Robot
- #1 Avoiding Obstacle Robot
- Utrasonic Avoidance Robot Using Arduino
- Obstacle Avoiding Robot With Servo Motor Arduino
- Obstacle Avoiding Robot (Arduino)
- “GRECO” - Arduino Object Avoiding Robotfor Beginners