Other
“Hey what’s up guys, this is the SHROOM PCB Badge that is themed after SHROOM from Super Mario. This wearable Badge is made completely from PCB I got from PCBWAY and is powered by an Attiny85 which is in …
“Perhaps the most convoluted walking mechanism I’ve ever seen, “Wacky Walker” was a lot of fun to design, 3D print, assemble, test, and, most important, watch in action! The inspiration for this model came from JK Brickworks Lego reproduction …
“Connect multiple IO Expanders together using a 9-bit multidrop communications. Story RS232 is typically used as a point to point (P2P) communications network. To amplify the signal to go long distances, transceivers (7-12V) were used, which constrained the communications to …
“A desk clock with retrograde minutes and jumping hours mechanisms. Retrograde minutes : The minute hand moves reciprocallyJumping hour : Numerical hour display that changes instantly”
“A “Tree of Light” with 9 plexiglass discs each adorned with LEDs arranged in a flower shape. What’s it for? This 4-foot tall structure is a prototype for a larger LED structure we’re building this year that we …
“Cheap and easy to build using VirtualPanel AMG8833 Thermal Camera Based on the AMG8833 Grid-EYE sensor by Panasonic I built a simple thermal camera by hooking up the sensor module to an Arduino Uno (4 wires). Using VirtualPanel as …
“Battery powered, stand-off acoustic water leak detection Story The AquaPing is an ultra-low power smart sensor that provides stand-off water leak detection — even for leaks behind walls. No contact with plumbing is needed. All signal processing and analysis occurs at …
“”A pinball machine that plays itself, doesn’t that take all the fun out of it?” I hear you ask. Maybe if you’re not into autonomous robots it might. Me, however, I’m very much all about building robots …
“Small USB to Serial programmer module, with Type C port and having compatibility with Arduino micro-controller. There are lot of programmer boards that are compatible with Arduino. But the cheapest and smaller one I found on internet is based on …
“A simulation of a real life car parking using Arduino, Ultrasonic sensors, LCD Display and RGB LEDs. This project is based on some car parkings, which is, an indication if the local is free or occupied, so for the simulation …