Content for ST7735

ST7735

The ST7735 is a single-chip controller/driver for 262K-color, graphic type TFT-LCD. It consists of 396 source line and 162 gate line driving circuits. This chip is capable of connecting directly to an external microprocessor, and accepts Serial Peripheral Interface (SPI), 8-bit/9-bit/16-bit/18-bit parallel interface. Display data can be stored in the on-chip display data RAM of 132 x 162 x 18 bits. It can perform display data RAM read/write operation with no external operation clock to minimize power consumption. In addition, because of the integrated power supply circuits necessary to drive liquid crystal, it is possible to make a display system with fewer components.

Description Source

Project  Thrust Stand and Power Analyser low cost

Thrust Stand and Power Analyser low cost

“The commercial existing Thrust Stand and Power Analyser is very expensive, I tried to make one at low cost, less than 30€. The existing motor tests benchs, thrust and power analyzer, are very expensive, I tried to make one at …

Project  Particles Detector for Air Quality

Particles Detector for Air Quality

“In this project I show how to build a particles detector with data display, data backup on SD card and IoT with Android application. In this project I show how to build a particle detector with data display, data backup …

Project  Art Deco Weather Forecast Display

Art Deco Weather Forecast Display

“Hello Friends, in this tutorial we are going to see hot to build this Weather Forecast Display. It uses a Wemos D1 mini board along with a 1.8” Color TFT screen to display the weather forecast. I also designed …

Project  Adjusting dual clock using DS3231 on 1.8” ST7735 display

Adjusting dual clock using DS3231 on 1.8” ST7735 display

“This clock show you 2 clocks: local time and UTC/GMT time. It has 3 buttons for MENU/OK, increase and decrease value for hours, minutes, day in week, year, month, day, diference betwenn local time and UTC tome (GMT …