Other
“I tried to make robotic arm that I can control with arduino and you can see the results. In this instructable I am going to show you how to make MeArm and in other one I will show you how …
“There’s a growing movement of people who believe that our space agencies are underfunded and that humanity isn’t paying enough attention to our present accomplishments and future plans in space exploration. Well, I know one way to direct …
“This project was for ‘Creative Electronics’, a Beng Electronics Engineering 4th year module at the University of Málaga, School of Telecommunications. I would like to start this project by saying that, in the first place, all this was intended to …
“Today we going to make an ULTRASONIC RADAR, we will be using the Arduino IDE to make the sketch for receive the data of the ultrasonic sensor and to send instructions to our servomotor. The Processing program is to make …
“MT-20 is a 3D printed robot controlled by an Arduino board and actuated via 5 servos. The video above contains a few animation cycles, the 3D printing process, and the final assembly. This Instructable goes more in depth into …
“Why? Because everyone needs a robot Claw! This instructable will show you how to 3D print and build a simple robot claw that you can then attach to any of your Arduino projects. You could put it on a RC …
“Seeing my Arduino Arm (for Office Catapult) laying around, I was thinking “What else can I do with it?” At the moment I was having my Basketball ring renewed. I need to move my body a little, rather than just …
“The story of this motor shield is that I wanted to make a robot for my multifunctional brainwave controlled system and I decided to share this with you. It’s a very simple circuit I used the L293D IC that …
“In This project I will guide you on how to easily build your own Mini-CNC machine and with a low cost (using arduino and scraped old DVD/CD drivers). I decided to write this detailed tutorial in order to …
“This is my homemade Ball & Plate system. System consist of 2 digital servo motors (HS-422 ECO), microcontroller Arduino UNO, and 4 wire resistive touchscreen (7”). There are two PID controllers working separately for each axis. This system can move …