Content for HC-06

Mobile Station prototype for Environmental Data Capture (“a Mars Rover emulator”)

“This project is entitled for the development of a fully functional mobile prototype the Rover Station, responsible for environmental data capture as Temperature, Humidity and Luminosity. The idea is in the future agregate other functions to emulate what would be …

OpenTrashCan: A Smart Internet Connected Trash Can

“OpenTrashCan connects to your wifi network and sends you an email when its full, talks to you, This project started out serious, then I kept thinking of funny things I wanted to make it do. The only way I could …

RFID-Bluetooth Door Lock

“This is my first Instructable and my first arduino project, I hope you will find it useful as well. After looking through the projects on Instructables I could only find either a bluetooth door lock or a rfid door lock …

Using the HC-06 Bluetooth Module

“After my first post using a Bluetooth module, things have evolved a bit. The challenge with these Bluetooth modules is: they look the same, but having different firmware. I did not fully realize that until I have ordered another bluetooth …

Voice Controlled Robot Arm

“Have you ever felt fustrated doing things wishing you had one more hand? Well, this will help you. This is a robot that can do whatever that you want just speaking to it for example you can say “up” and …

Bluetooth Desk Lamp

“In this project we will be making a wireless side lamp that can be controlled via Bluetooth connected to an Arduino UNO to switch on and off the lamp right form your smart phone (Android only) . For the 2D-design we …

Spider Robot

“This is my first project for the 4 legs robot and it took me about 1 year development. It is a robot that relies on calculations to position servos and pre-programmed sequences of legs. I’m doing this by handmade …

DIY Weather Station with Bluetooth

“Recently I attended a course in our University of Electrical Engineering and we were making ourselves a small weather station. It included learning about soldering, sensors and arduino. It was super fun making it with little kids and other high …

Autonomous / Voice Controlled - 3D Scanning Rig For 3D Printing

“The idea behind the voice controlled / autonomous 3D scanning rig is to allow for a 3D scanning capture to work as smooth as possible with the minimum effort for the person how is scanning as for the person how is …