“A joint research team, affiliated with UNIST has announced that they have successfully developed a thermoelectric technology to produce power-generating tubes using 3D printing techniques. Researchers found that the tube-shaped device is more effective than conventional devices.
This breakthrough has been jointly led by Professor Han Gi Chae and Professor Jae Sung Son from the Department of Materials Science and Engineering, and Professor Sung Youb Kim from the Department of Mechanical Engineering at UNIST.
“Through this research, we will be able to effectively convert heat generated by factory chimneys, the most common type of waste heat source, into electricity,” said Professor Son. He said this is because the existing thermoelectric devices were in rectangular parallelepiped shapes.
In this study, researchers created the thermoelectric tube using a 3D printed ink made of lead (Pb) and tellurium (Te). Metal particles were mixed inside a glycerol solvent to provide viscoelasticity, a status that exhibits both viscous and elastic characteristics. The tube has a high thermoelectric performance at temperatures between 400 and 800 degrees Celsius, which is the temperature range of a car’s exhaust gases. The tube shape makes it more effective in collecting heat than a conventional cuboid type.
“If we use 3D printing technology in the production of thermoelectric materials, we will be able to overcome limits of conventional materials,” said Professor Chae. “The new technology for providing viscoelastic characteristics to 3D printed materials will be used in various other sectors.”
The findings of this research have been published in the online version of Advanced Energy Materials, ahead of publication, on April 15, 2021. It has also been featured on the front cover of Advanced Energy Materials. This study has been jointly participated by Professor Sangjoon Ahn, Dr. Jaehyung Hong, Professor Ji Eun Lee from Chonnam National University, and Jeongin Jang from Korea Electrotechnology Research Institute.
Jungsoo Lee, Seungjun Choo, Hyejin Ju, et al., “Doping-Induced Viscoelasticity in PbTe Thermoelectric Inks for 3D Printing of Power-Generating Tubes,” Adv. Energy Mater., (2021).”