“The SparkFun OpenLog Artemis (OLA) is a versatile, open source data logger that comes preprogrammed to automatically log a wide variety of data from a large number of sensors. And here’s the best bit… You can do all of this without writing a single line of code! The OLA automatically detects which sensors are connected to it and logs the data to microSD card in standard Comma Separated Value (CSV) format. The OLA is designed for users who just need to capture a bunch of data and get back to their larger project. We will quickly get you up to speed with the OLA and the Qwiic ecosystem so you can start logging all that data!
Required Materials
To follow along with this tutorial, you will need the following materials. You may not need everything though depending on what you have. Add it to your cart, read through the guide, and adjust the cart as necessary.
SparkFun OpenLog Artemis [DEV-16832]
microSD Card formatted with FAT32 [COM-15107]
A USB-C cable for configuration and LiPo charging
Our USB 2.0 A to C Cable [CAB-15092] will do nicely
Our USB 3.1 A to C Cable [CAB-14743] is a good choice too
Lithium Ion Battery [PRT-13813]
At least one Qwiic cable
A single 50mm Cable is all you need to get going
Our Qwiic Cable Kit covers all the options
Any additional sensors you may need”