Main Content

Female+Male connector 2.54 mm

I will show you my self-made connector for wires.
It is convenient to use it for DIY, for electronic devices.
The connector will withstand high currents. It is easy to connect and disconnect.

Female+Male Pin header 2.54 mm


More my models


Material: ABS
Nozzle diametr: 0.4 mm
Extrusion width: 0.4 mm
Layer height: 0.1 mm
Extruder temp: 235 °С
Heated bed temp: 80 °С
Infill: 100%
Support: no
Speed: 100 mm/s
Bottom/top/perimetr layers: 5/5/3 Inside-Out”

Link to article