“This 100% fully printable PCB and IC Vise project is my personal remix to the original “Fully Printable PCB Vise” by sneakypoo, with some mods made by other people, and a few of my own personal mods. This vise is PERFECT for holding Printed Circuit Boards (PCB), Integrated Circuit (IC) boards, and/or any other small electronics. The vise is useful for soldering or working with these circuit modules. The vise is 100% printable and should be easy to print on most 3D printers with a 200mm X 200mm print bed. Most importantly, this vise can be assembled without any glue or screws - you just snap the vise together and it is ready to use! I should also mention that this vise is NOT designed to grip, compress, or squeeze an object with any real amount of force – the vise is really only strong enough to hold the items in place while you’re working on them. Also, there are some important items to consider when building this vise, so be sure to see the notes I’ve provided below.”