The following sections describe how to build the LEDmePlay with the appearance shown on this site. Feel free to change parts of our design or add extra features, such as additional buttons, a more fancy housing, a smaller LED matrix. Before you start with the reproduction of the LEDmePlay, you need to buy the required electronics parts. The main components are the Arduino MEGA 2560, the RGB LED matrix, and a suitable power supply. Additionally, you need some cables to connect everything. Whether you plan to use the same picture frames that we used for the housing is up to you. The joysticks need not be the same as ours. Any C64 compatible joysticks from the Eighties era should work. What about real arcade controllers inside a small arcade cabinet? Here is the parts list. Unless otherwise stated, you can buy these or compatible parts from any electronics specialist shop. We paid an overall price of approximately 100 EUR.”