“I like LiFePO4 batteries. They have a rather flat discharge at around 3.2V, which is ideal for powering 3.3V devices without a regulator. You can also use them in devices that take 2 standard AA cells by using a blank shunt in the 2nd battery slot since 2 fresh alkaline cells in series provide 3.2-3.3V. And since they are readily available in the 14x50mm AA size, you can use cheap AA holders for them in electronics projects. When it comes to chargers, things can be a bit problematic. LiFePO4 batteries should be charged to 3.6V, rather than 4.2V like regular lithium-ion batteries. A good charger costs $10-$15, but charging at a high current will reduce the number of recharge cycles. The Soshine batteries I bought indicate on the label a standard charging current of 300mA to 3.6V. Rather than search for a charger to fit the bill, I decided to make one.”
Related Content
Related Posts:
- Ni-MH Battery Charger
- How to make universal battery charger
- Automatically re-connecting low-voltage cut-outs for 12 and 24 volt lead acid battery systems
- Universal Battery Charge Indicator 3.7v-24v
- A low-voltage disconnect for 12 volt lead acid and lithium batteries
- Micro-usb 30F Supercapacitor Flashlight
- Reuse Old Mobile Phone Batteries
- LIR2032 Charger
- DIY LiPo Charge/Protect/5V Boost Circuit
- 6V Lead Acid Battery Charger using BQ24450