Other
“I wasn’t satisfied about the most of the fan covers available on thingiverse, because the finer details aren’t optimized for 3D printing. That’s why I designed this customizable fan cover, where you are able to use different …
“This is an update to the Public Domain involute Gears library by @3dexplorer, with optimisations by @zkarcher. This library provides a module called gear(), which makes ordinary gears, helical gears (twisted like a screw), inner gears (teeth on the inside …
“Weather Stations are a very useful devices, and as we increase our knowledge of the global weather, quantifying our own local experience is also popular. Integrating aspects of the weather to IoT is increasingly important. This project does not invent …
“Spring is coming and there are lots of plants to get started. Here’s a customizable flower pot to help. I’m not sure how well PLA really works as flower pot material (it should be fine), but you don …
“Inspired by https://www.thingiverse.com/thing:2143936. Differences:There are rotary grips at both ends of the screws.The slots in the rulers are divided into two sections to improve stability.Rulers are 200 x 24 x 2.5 …
“About This project was intended to prove if it is possible to build a pointing device (mouse) for people with disabilities for under 20 USD, using only components which are widely available as well as a 3D printer. The result …
“grafter is a software system that allows users to remix 3D printed machines. It does so by extracting mechanisms from existing machines in a semi-automatic fashion and using these as building bricks to create new machines with. This allows users …
“A full range of cable clips / pipe clips. 40 sizes from 20mm (25/32 in) to 60mm (2 23/64 in) in 1mm increments. These clips are medium duty - being strong enough for most applications. For a low poly, lighter …
“Pythagoras, Pythagorean Theorem, 3D Models The Pythagorean Theorem can be illustrated (not proved) using 3D models. In fact, it is a direct implication of a^2 + b^2 = c^2 in a 3D space. Pick an h > 0. Then, ha …
“I added a couple holes in each end. I was going to put some barrel jacks in them. Go ahead and put whatever you want into those holes.”