Other
“I have made a simple bluetooth car along with it i have made ultrasonic parking sensor.”
“Follow the sun with Arduino! In this tutorial, we’ll be building an Arduino based Solar Tracking Turret. Most commonly, these are used in Photovoltaic systems to maximize the surface area of sun exposure on solar panels. This is an …
“I had to build and program a solar tracker for my BTech project. I got most parts laser cut out of wood from a drawing I made in Solidworks.”
“One of my main goals with this design is to archieve very low standby current, somewhere in the tens of microamps. The basis for this is a low-power buck on the basis of a Texas TPS62120 where the microcontroller can …
“This instructable shows how to create a time switching battery powered solar charged circuit, which is used to power an Arduino Uno and some peripherals (sensors, communication modules, etc.). If you want to design a remote data logger, power supply …
“This is a 48 Led solar / AC rechargeable emergency light. Fully recharged battery works 9 hrs with 24 led’s and 4.5 hrs with 48 led’s. A SPDT switch is used to select 24 and 48 led’s …
“Today I am back with another project called DIY AUTOMATIC SOLAR CHARGE CONTROLLER. It’s an automatic switching circuit that used to control the charging of a battery from solar panels or any other source. It’s a 555 based …
“Five years ago when I moved to Sonora (the most sunny state in Mexico) I decided to build a solar water heater (SWH) and save money and CO2 on fossil energy. It took me 6 months to figure out which …
“The solar panel used in the project is rated at 6V and 150mA which provides about 0.9W/h in ideal conditions and the Li-Po battery is rated at 3.7V and 4000mah which can deliver approximately 15W/h. We …
“Maker is always sensitive to the new and funny things. One day, I watched a video, in which the sunflower moves along with the sun. I had a sudden insight then. Why can’t I make a electronic device inmitating …