Content for PIC16F886

PIC16F886

This powerful yet easy-to-program (only 35 single word instructions) CMOS FLASH-based 8-bit microcontroller packs Microchip's powerful PIC® architecture into a 28 pin package.The PIC16F886 features 256 bytes of EEPROM data memory, self programming, an ICD, 2 Comparators, 11 channels of 10-bit Analog-to-Digital (A/D) converter, 1 capture/compare/PWM and 1 Enhanced capture/compare/PWM functions, a synchronous serial port that can be configured as either 3-wire Serial Peripheral Interface (SPI™) or the 2-wire Inter-Integrated Circuit (I²C™) bus and an Enhanced Universal Asynchronous Receiver Transmitter (EUSART). All of these features make it ideal for more advanced level A/D applications in automotive, industrial, appliances or consumer applications.

5.1 channel preamplifier

“Digitally controlled 5.1 channel audio preamplifier system to increase the gain of the multi-channel PC sound cards. This project introduces a digitally controlled 5.1 channel audio preamplifier system. This amplifier is specifically designed to increase the gain of …

PIC Arduino for Motor Control Projects

“This board created for makers, who want to use various Arduino UNO shields with PIC micro-controllers from Microchip. Board facilitates the use of any 28 PIN DIP PIC microcontroller with or without crystal. Omit Y1 , C9 and C10 in case …

Capacitive Touch With PIC16F886 Microcontroller

“In this tutorial we will go over how you can use a PIC16F886 microcontroller to detect differances in capacitance, this can later be used to tell if a touch pad is being pressed. It’s good to be familiar with …

PIC Arduino with RS485

“This board created for makers, who wants to use various Arduino UNO shields using PIC microcontrollers from Microchip. Board facilitates the use of any 28 PIN SMD SO PIC microcontrollers without crystal (internal oscillator). Project also can be used to …

Flex Sensor to bargraph monitor using PIC16F886

“Tiny Bar-Graph display provide a Red color bright, easy to read display which is proportional to the force applied on FLEX sensor surface. This Bar-Graph has 20 segments in single color and display Force applied on FLEX sensor. The Barograph …

Bargraph Voltmeter 0-5V DC range PIC16F686

“Tiny Bar-Graph displays provide a Red color bright, easy to read display of Voltage range of 0 to 5V. This Bar-Graph has 20 segments in single color and display 0 to 5V DC. The Barograph Voltage monitor is based on …

Low cost OBD2 communications on K-line (ISO 9141-2 and ISO 14230-4)

“This is just another OBD2 solution for monitoring the sensors in a verhicle. It supports the K-line OBD2 serial communication between a verhicle and a microcontroller. This K-line communication is also known as ISO 9141-2 or ISO 14230-4 (also known …