Content for LT1054

LT1054

The LT1054 is a monolithic, bipolar, switched-capacitor voltage converter and regulator. The LT1054 provides higher output current than previously available converters with significantly lower voltage losses. An adaptive switch driver scheme optimizes efficiency over a wide range of output currents. Total voltage loss at 100mA output current is typically 1.1V. This holds true over the full supply voltage range of 3.5V to 15V. Quiescent current is typically 2.5mA. The LT1054 also provides regulation, a feature not previously available in switched-capacitor voltage converters. By adding an external resistive divider a regulated output can be obtained. This output will be regulated against changes in both input voltage and output current. The LT1054 can also be shut down by grounding the feedback pin. Supply current in shutdown is less than 100μA.

Description Source

Project  breadWare

breadWare

“A jumperless breadboard breadWare is a prototyping tool where jumper connections can be made by sending commands from a computer instead of placing physical wires. The onboard ATmega4809 can also read and write any analog (±9V) voltage to anywhere on …

Project  -5V @100mA Switched Capacitor Converter

-5V @100mA Switched Capacitor Converter

“The circuit diagram presented here is about a negative voltage regulator. It is based on LT1054, which is a switched capacitor voltage converter with regulator from Texas instrument. This device has many advantages over other previously available switched capacitor voltage …