Other
“The Haptic glove is a device for the blind and/or visually impaired that provides the wearer with information about obstacles in their immediate surroundings. The glove uses two ultrasonic sensors that report the distance and orientation of objects. Depending …
“With the rise of self-driving, autonomous cars today, I decided to take on the challenge of making one of my own. This project also served as my capstone project in my Engineering Design and Development and Robotics classes and received …
“This useless robot will panic if you get very close. By shaking its arms it will try to push you away but truth is this monkey needs love! Material Needed: Servo Motor 1 (HS-422) Servo Motor 2 (HS-805 …
“This instructable was created in fulfillment of the project requirement of the Makecourse at the University of South Florida (www.makecourse.com). In this tutorial you will learn how to make a fully automated robot named Rob who is equipped …
“This Instuctable shows how to make a sensor based vehicle. The sensors used are the ultrasonic sensor, microphone sound sensor and IR sensor receiver. The vehicle is aware of his surroundings so he will try not to hit obstacles but …
“This instructable was created in fulfillment of the project requirement of the Makecourse at the University of South Florida (www.makecourse.com). This project demonstrates how an Arduino along with a Dual H-bridge Motor Drive is able to control four …
“If you want to experiment with ultrasonic levitation and let objects float through the energy of sound waves, you do not need any scientific equipment, complicated controls or expensive kits. An Arduino, a stepper motor driver and a rebuilt distance …
“In this guide I will show you how to make your own Arduino learning shield. This learning shield can be useful at schools, universities and to everyone that want to start dealing with the Arduino. With this shield you will …
“Well, you might have seen this awesone Ultrasonic based RADAR system being done many times by the community of hobbyists in the past. Here I am not trying to claim the first rights for the RADAR system based on ultrasonic …
“In developing an OLED ID Tag, I needed to make my design as energy efficient as possible. One approach was to only display the tag if there was someone nearby (think ComiCon or Exhibition booths). The sensors themselves can draw …